Fountain reassembly – Petsafe Drinkwell® Outdoor Dog Fountain User Manual

Page 12

Advertising
background image

www.petsafe.net

12

FOUNTAIN REASSEMBLY

6)

7)

8)

9)

10)

11)

If the housing lid was removed during cleaning, replace and then
proceed to the next step.

Replace the housing by lining up the locking tabs with the
openings on the top of the bowl; gently push down until you hear
the tabs lock in place.

Next, replace the two pre-filters by simply sliding into place with
the raised lip facing out.

Fill both of the reservoirs with water and replace the reservoir caps,
make sure they are tightened all the way. Set reservoirs upside
down with the caps facing up, until the fountain and housing is
filled with water.

Rinse the charcoal filter under cold water to remove any loose
charcoal dust. Insert the filter narrow side down with the black side
facing out towards the bowl. The filter will slide easily into place,
but make sure it is pushed all the way down.

Place the fountain in a desired location. The Outdoor Dog
Fountain is intended for year-round indoor household use or
seasonal outdoor use. Do not operate the fountain in temperatures
below 40° F/4.4° C. Be sure the electrical cord comes out through
the cord notch at the back of the fountain, so that it sits level on
the floor.

When placing the fountain Indoors, be sure to protect your floors from spills and splashes that can be
caused by your pet. If placing on carpet, tile or wood - always use a protective mat.

When placing the fountain Outdoors, be sure the fountain is placed on a level surface. It is best to put the
fountain in a covered location and out of direct sunlight if possible. By keeping the fountain in a shady spot,
the water will stay cooler for your pet.

Fill the fountain with water. This includes both the bowl and the
housing. Replace the two reservoirs on the back of the fountain
with the fill-line indicators in plain view. This will help you monitor
the water level in your fountain and let you know when to refill the
reservoirs.

Make sure the cord, the adaptor and your hands are completely
dry, then plug the fountain into an electrical outlet.

12)

13 )

Advertising