Petsafe Drinkwell® Zen Fountain - Manual (Page 3)

3
1) As with any electrical device, check the electrical cord for any tears
or damage before use.
2) Make sure the inline plug is fully connected (Fig. 1).
3) Locate the housing clips underneath the bowl rim and press inwards
on the clips until you feel them release. Lift straight up on the housing
to remove (Fig. 2).
DO NOT RUN DRY - FOR INDOOR HOUSEHOLD USE ONLY
OPERATING INSTRUCTIONS
NOTE: Rinse the filter thoroughly under cold water before placing in
the fountain. This will remove any loose charcoal dust, which
is harmless. A small amount of charcoal dust may shed for the
life of the filter. This is normal and not harmful to your pet.
4) Rinse the charcoal filter thoroughly in cold water. Turn the housing
upside down and slide the filter inside the housing between the two
angled slots (Fig. 3a). Make sure the filter is pushed all the way
down and that the black side is facing the pump (Fig 3b).
Fig. 1 Fig. 2
Fig. 3b
Filter Slots
Fig. 3a