Petsafe Elite Big Dog Add-A-Dog® Extra Receiver Collar - Manual (Page 15)

www.petsafe.net 15
Handheld Remote Functions for Dog 2 Mode
Upper Left Button Dog 1 Tone
Lower Left Button Dog 1 Stimulation
Dog 1 +2 Boost Press Boost and the Lower Left Button simultaneously
Upper Right Button Dog 2 Tone
Lower Right Button Dog 2 Stimulation
Dog 2 +2 Boost Press Boost and the Lower Right Button simultaneously
Dog 1/Dog 2 Correction Levels
To change the correction level for Dog 1 or Dog 2, press and hold the +2 Boost for 5 seconds. The Dog
1 icon along with it's selected correction level will appear. You can now use the Upper Right button to
increase the correction level for Dog 1 and the Lower Right button to decrease the correction level. Press
the +2 Boost button to lock the correction level. Now you can adjust the Dog 2 correction level using the
same method. Press the +2 Boost button to lock the correction level and return to normal 2 Dog operation.
Note: To view the currently selected correction level for Dog 1, press the +2 Boost button once
and the display will show the Dog 1 symbol along with the selected correction level.
To view the currently selected correction level for Dog 2, press the +2 Boost button twice and the
display will show the Dog 2 symbol along with the selected correction level.
To Remove Dog 2 from the Handheld Remote
Press and hold the +2 Boost button for 5 seconds. Press the Right Lower button until
the “1d” symbol appears on the Digital Display. Press +2 Boost to exit the menu.
Step 5
To Pair Dog 1 Receiver Collar and the Handheld
Remote
If your Receiver Collar does not beep when the Upper Left button of the Handheld Remote is
pressed, or if the Receiver Collar is not responding to the Handheld Remote, follow these steps:
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. Press the Tone button .
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Center.
Note: Pairing is for Dog 1 only.