Petsafe Elite Big Dog Bark Control - Manual (Page 8)

8 www.petsafe.net www.petsafe.net 9
EN
FR
ES
NL
IT
DA
DE
Care and Cleaning
• Your dog’s neck and the Contact Points must be washed weekly with a damp cloth.
• Be sure that your pet’s neck is thoroughly dry before placing the Bark Collar back on his neck.
Risk of skin damage.
• For comfort, safety and effectiveness of this product, please ensure that
you check the fit of your pet’s collar frequently. If any skin irritation
is observed, discontinue the use of the collar for a few days. If the
condition persists beyond 48 hours, see your veterinarian.
• Do not attach a lead to the collar. This can result in pulling the Contact
Points too tightly against your pet’s neck. Attach a lead to a separate,
non-metallic collar or harness, making sure the extra collar does not put
pressure on the Contact Points.
ON/OFF Battery Module
The PetSafe ® Deluxe Anti-Bark Collar is packaged with the battery module installed in the
“OFF” position. To activate the collar, use a coin to turn the Battery Module counter clockwise
until the arrow lines up with the “ON” position. If the PetSafe ® Deluxe Anti-Bark Collar is not
going to be used on the dog immediately leave it in the “OFF” position.
To Insert and Remove the Battery
Note: Do not install the battery while the Deluxe Anti-
Bark Collar is on your dog.
1. Align the triangles on the battery and the Deluxe
Anti-Bark Collar (A).
2. Use a coin to turn the battery clockwise until the
triangle lines up with the “ON” position if you are
putting it on the dog or the “OFF” position if it is
not being put on the dog right away (B).
3. To remove the battery, turn the battery counter-
clockwise using a coin (C, D).
DO NOT attempt to cut into or pry open the battery. Be sure to discard the
used battery properly.
D C
A B