Petsafe Pawz Away® Mini Pet Barrier User Manual
Page 15
Advertising
www.petsafe.net 15
4. To program the Receiver Collar to either mode A or mode B, press and hold the (-) button and then press the (+) button
for approximately 5 seconds. Programming is complete when you hear a series of three beeps from the Receiver Collar.
5. Once the Receiver Collar has been programmed, press the (+) button to turn the
Barrier Transmitter ON. Check to make sure the black bar(s) appear on the LCD screen indicating the mode you have
selected (5B) and reset the Barrier Transmitter to the desired range.
Mode A
Mode B
Mode AB
5B
Advertising