Petsafe ST-70, 70 m Basic Remote Trainer - Manual (Page 11)

www.petsafe.net 11
DE
NL
IT
FR
ES
EN
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Turn on the Receiver Collar.
3. Press and hold the Tone A, Tone B, and Static Stimulation 4 buttons at the same time (the LED
should be lit) until the collar fl ashes and beeps, indicating it has learned the Remote Transmitter ID.
4. Press the Tone A or Tone B Button. The Receiver Collar should emit a tone, verifying that it is
paired with the Remote Transmitter.
5. If the Receiver Collar does not respond, please contact the Customer Care Centre.
TRAINING GUIDE
Please visit our website at www.petsafe.net to download an extended Training Guide for this unit
or contact our Customer Care Centre for further assistance. For a listing of telephone numbers in
your area, visit our website at www.petsafe.net.
General Tips
• Eliminate one misbehaviour or teach one obedience command at a time. If you move too fast
with training, your pet may become confused.
• Be consistent. Correct your pet every time he misbehaves.
• Unless you can supervise him, it is recommended that you restrict your pet from situations in
which he has a history of misbehaving. However, setting up a situation as a training session
can dramatically improve your chances of success.
• If your pet reacts to the tones by hiding or acting fearful, redirect his attention to a simple and
appropriate behaviour, such as the “sit” command.
• Pets should be at least 6 months old before using the Remote Trainer.
• Other pets in hearing range will be affected by the training tones. Therefore, training sessions
should be conducted out of hearing range of other pets.
Never use the Remote Trainer to correct or eliminate any form of
aggressive behaviour. If you are unsure if your dog is aggressive,
please consult your veterinarian or a certifi ed trainer.