Petsafe ST-70, 70 m Basic Remote Trainer - Manual (Page 13)

www.petsafe.net 13
DE
NL
IT
FR
ES
EN
Find the Best Static Stimulation Level for
Your Pet
Important: Always start at the lowest level and work your way up.
The Basic Remote Trainer has 12 different Static Stimulation Levels. This allows you to choose the
static stimulation that is best for your pet.
Once you have placed the Receiver Collar on your pet, it is time to fi nd the Static Stimulation
Level that is best for him. This is called the Recognition Level.
A slight change in your pet’s behaviour, such as looking around in curiosity, scratching at his
collar, or fl icking his ears, indicates the Recognition Level that is best for him.
Follow the steps below to fi nd your pet’s Recognition Level:
1. Starting at Low ( I ) on the Static Stimulation Range Switch, press the Static Stimulation Level
1 button continuously for 1 to 2 seconds.
2. If your pet shows no reaction, repeat the Static Stimulation Level several times before moving
up to Low Static Stimulation Levels 2, 3, and 4.
3. If your pet shows no reaction to Low Static Stimulation Levels 1, 2, 3, or 4 move the Static
Stimulation Range Switch to Medium ( II ), press the Static Stimulation Level 1 button
continuously for 1 to 2 seconds.
4. If your pet shows no reaction, repeat the Static Stimulation Level several times before moving
up to Medium Static Stimulation Levels 2, 3, and 4.
5. YOUR PET SHOULD NOT VOCALIZE OR PANIC WHEN RECEIVING STATIC
STIMULATION. IF THIS HAPPENS, THE STATIC STIMULATION LEVEL IS TOO HIGH AND
YOU NEED TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS.
6. Move up through the Static Stimulation Levels until your pet reliably responds to the
static stimulation.
7. If you have moved the Static Stimulation Range Switch to High ( III ) and your pet continues
to show no response, check the fi t of the Receiver Collar. Then go back to step number1
and repeat the process. If this still does not yield any results, your pet’s hair will need to be
trimmed around the Contact Points.
If all of these steps have been done and your pet continues to show no reaction to the static
stimulation, see the “Test Light Instructions” section.
If after completing all of these steps your dog still does not indicate he is feeling the static
stimulation, please contact Customer Care Centre or visit our website at www.petsafe.net.