Transmitter range chart, Step 4 place the boundary flags, En fr es nl it de – Petsafe Wireless Pet Containment System PIF-300-21 User Manual

Page 11

Advertising
background image

11

www.petsafe.net

EN

FR

ES

NL

IT

DE

Transmitter Range Chart

(Note: These distances are approximate.)

Boundary Control

Dial Position

Boundary Switch LOW

Boundary Switch HIGH

1

1.5 m to 3 m (5 ft to 10 ft)

1.5 m to 3 m (5 ft to 10 ft)

2

1.5 m to 3 m (5 ft to 10 ft)

1.5 m to 3 m (5 ft to 10 ft)

3

4.5 m to 6 m (15 ft to 20 ft)

7.5 m to 10.5 m (25 ft to 35 ft)

4

6 m to 7.5 m (20 ft to 25 ft)

12.5 m to 16.5 m (42 ft to 55 ft)

5

7.5 m to 9 m (25 ft to 30 ft)

16.5 m to 19.5 m (55 ft to 65 ft)

6

10.5 m to12 m (35 ft to 40 ft)

23 m to 26 m (75 ft to 85 ft)

7

12 m to 13.5 m (40 ft to 45 ft)

26 m to 27.5 m (85 ft to 90 ft)

8

12 m to 13.5 m (40 ft to 45 ft)

26 m to 27.5 m (85 ft to 90 ft)

Record Your Settings

Final Boundary Switch
Setting (HIGH or LOW)

Final Boundary Control

Dial Position (1-8)

Receiver Static

Stimulation Level (1-6)

Home

Camping

Vacation
Other

STEP 4

Place the Boundary Flags

The Boundary Flags are visual reminders for your pet of where
the Boundary Zone is located. The Receiver Collar will activate
within 0.6 m to 1 m (2 ft to 3 ft) of the Boundary Flags.
1. Using the Test Light, with the Static Stimulation Level

set at 2 or greater, hold the Receiver Collar at your
pet’s neck height with the PetSafe

®

logo facing away from

the Transmitter.

2. Walk towards the Boundary Zone until the Receiver Collar

beeps and the Test Light fl ashes (4A).

3. Place a Boundary Flag in the ground (4B).
4. Walk back into the Pet Area until the beeping stops.
5. Repeat this process around the Boundary Zone until it is marked with Boundary Flags every

3 m (10 ft).

H

A

P P Y O

W

N

E

R

S

S

A

F

E

P E T

S

4A

4B

Advertising