Petsafe Wireless Pet Containment System PIF-300-21 - Manual (Page 9)

9 www.petsafe.net
EN
FR
ES
NL
IT
DE
4. Increase the Static Stimulation Level by pressing and releasing the Stimulation Level Button within 5
seconds of the previous series of fl ashes.
5. After setting the Static Stimulation Level, replace the cover to protect the Stimulation Level Button.
The Static Stimulation levels increase in strength from 1 to 6. Pushing the Stimulation Level Button
while the Receiver Collar is on level 6 will cause the Receiver Collar to revert to level 1. Refer to the
Function and Response Table to choose the Static Stimulation level that best fi ts your pet.
The Receiver LED Indicator Light acts as a low battery indicator, fl ashing every 4 to 5 seconds when
replacement is required.
Battery Contact Verifi cation
Remove Receiver Collar from your pet. Press the button and verify that the LED light illuminates. If
the LED light does not come on remove the battery. Locate the metal tabs in the battery well. Gently
lift the tabs to ensure that the battery will make good contact. Replace the battery into the Receiver
Collar. Press the button and check that the LED light illuminates.
Function and Response Table
Indicator
Light
Response
Static Stimulation
Level
Receiver Collar Function Temperament of Pet
1 Flash 1 No Static Stimulation,
Tone Only
2 Flashes 2 Low Static Stimulation Timid
3 Flashes 3 Medium-Low Static Stimulation Timid or Average
4 Flashes 4 Medium Static Stimulation Average Energy
5 Flashes 5 Medium-High Static Stimulation Average or High Energy
6 Flashes 6 High Static Stimulation High Energy
Flashes once
every 4 to 5
seconds
Indicates Low Battery
Over Stimulation Protection
If your pet enters the Boundary Zone or continues anywhere beyond the Pet Area, this feature limits
the Static Stimulation duration to 30 seconds.
In the unlikely event that your pet leaves the Pet Area, he will not receive a Static Stimulation upon
return to the Pet Area.