Operating guide, Step, Charge the receiver collar – Petsafe YardMax™ Rechargeable In-Ground Fence Add-A-Dog® Extra Receiver Collar User Manual
Page 12
12
Customer Care Center 1-800-732-2677
Operating Guide
Charge the Receiver Collar
1. Lift the rubber cover protecting the Receiver Charging
Jack.
2. Connect the Receiver Collar Charger connector to the
Receiver Charging Jack. Note: The connector only fits
one way, do not force it into the Charging Jack.
3. Plug the Receiver Collar Charger into a standard AC
wall outlet. The Receiver Collar light will glow red when
the charger is properly seated and charging.
4. Charge the Receiver Collar for 2-3 hours. The light will
turn green when charging is complete. A built in safety
circuit prevents the Receiver Collar from overcharging.
5. After charging, replace the rubber cover to protect the
Receiving Charging Jack.
Each charge can last up to three months depending on
frequency of use.
Step
1