Test light instructions – Petsafe YardMax™ Rechargeable In-Ground Fence Add-A-Dog® Extra Receiver Collar User Manual
Page 36
Advertising
36
Customer Care Center 1-800-732-2677
Test Light Instructions
1. Make sure the Receiver Collar
battery is properly charged. Set the
Correction Level to 2 or above.
2. Hold the Test Light Contacts to the
Contact Points (5A).
3. Walk toward the Boundary Wire
with Contact Points pointing up and
holding the Receiver Collar at your
pet’s neck level (5B) until the Receiver
5A
Collar tones and the
Test Light flashes (5C).
Note: The Receiver
Collar is waterproof,
which can make the
tone hard to hear.
Save Test Light for
future testing.
5B
Boundary
Wire
5C
Advertising