Canon P-150M - Manual (Page 38)

38
This method allows you to register the scanning procedure from the
scanning conditions to the output method as one job, and then scan a
document by just selecting the job that suits your purpose. This is
convenient when you want to repeat scanning using a set procedure.
Scan with Start Button
Scan First is pre-assigned to the Start button of the scanner, so you
can load a document and then start scanning by pressing the Start
button.
Connecting the Scanner to a
Computer
When scanning with CaptureOnTouch, set the Auto Start switch on
the rear panel of the scanner to the “OFF” position, and then use the
USB cable to connect the scanner to the computer.
The power supply USB cable can be connected as necessary.
Starting CaptureOnTouch
Use the following procedure to start CaptureOnTouch.
CaptureOnTouch becomes resident in the system when you start the
computer, and a CaptureOnTouch icon appears in the taskbar
(default). This icon displayed differs as follows depending on the
power status of the scanner.
Use the following procedure to start CaptureOnTouch.
1
Open the feed tray.
For details, see 28 page .
2
Click (the CaptureOnTouch icon) in the taskbar and
click [Launch CaptureOnTouch] in the menu that
appears.
CaptureOnTouch starts and the main screen appears.
Hint
• You can also start it from the Start menu. Click [Start] – [All
Programs] – [Canon P-150] – [CaptureOnTouch].
• You can set the CaptureOnTouch icon to not appear in the taskbar
when you log onto Windows. For details, see “Environmental
Settings” on p. 49 .
A5
A5 B5 A4 LTR
B5 A4
LTR
Start Button
Auto Start
OFF ON
Icon Meaning
Power is OFF (feed tray is closed)
Power is ON (feed tray is open)