Canon P-150M - Manual (Page 68)

68
Setting Scanning Conditions
Set various scanning conditions such as the scanning method and
document size. The scanning condition items are common to [Scan
First] and [Select Scan Job].
For [Scan First]
When using [Scan First], configure the scanner settings before
scanning begins.
For [Select Scan Job]
When using [Select Scan Job], configure the scanner settings for each
job.
Hint
Scanner condition settings include the basic items that are
configured in the [Scanner setting] dialog box (or [Scanner setting]
tab) and the setting items that are configured in the advanced
settings. The settings in the advanced settings dialog box are applied
for settings other than the basic items.
Basic Scanning Condition Settings
The [Scanner setting] dialog box includes the following items for
setting basic scanning conditions.
Color mode
Select from the following modes for scanning documents.
Auto Color Detection Automatically detects whether a document is
color or black and white, and scans.
24-bit Color Scans the document in color.
Grayscale Scans the document in grayscale.
Black and White Scans the documents in black and white
(binary).
Page size
Specify the page size of documents.
When [Auto size detect] is specified, the scanner detects the page
size of the document, and the image is saved in the detected size.
Orientation
Specify the orientation in which documents are inserted into the
scanner (vertical or horizontal).
This item can only be configured when a page size that can be fed
horizontally through the scanner is specified for [Page Size].
Dots per inch
Specify the scanning resolution.