Vertical Communications GCA70-313 User Manual
Page 63
4. CHOOSE your speed dial route from the following list:
•
PRESS line button to select outside line.
•
DIAL
00
to select prime line or last line used.
•
DIAL
01
to
16
to select line group.
•
PRESS
INTERCOM button or dial
8
to select intercom.
NOTE:
You may need a pause between numbers to compensate for differ-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press
HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press
TAP to store a hookflash, then continue dialing.
5. DIAL number (up to 16 digits long—include
*
and
#
if
needed).
6. PRESS
TRNS/CONF to store the number.
7. REPEAT previous steps until all numbers are stored.
8. PRESS
SPEAKER to end.
You can record your station’s programmed DSS and speed dial numbers on page
56 for quick reference.
Non-LCD Station User’s Guide
55
GCA70-313
Programming