Canon DR-5080C EN - Manual (Page 10)

9
3
S T E P
1 Remove documents from the scanner’s upper and lower trays, and
remove any extra parts attached to the upper (eject) tray. Close the
document eject tray guide if it is open.
Paper may be jammed if scanning stops midway or “PXX” appears on
the counter display. Please follow the procedure below to clear the
paper jam; when finished, confirm the final scanned document on the
PC monitor before continuing to scan.
▲
S T E P
2 Press the open/close button to open the upper unit. If it appears that
paper is jammed inside the scanner,* raise the upper unit until it stops
and holds position.
▲
S T E P
3 Remove the jammed paper from inside the scanner or from the exit
section.
▲
S T E P
4 Close the upper unit by pushing it up as far as it allows, and then letting
go. The unit will begin to descend slowly. Do not push the unit down
during its descent. When the upper unit has fallen as far as it can go,
press down firmly on both sides until you hear it click into place.
* If a document is jammed in the scanner’s exit section, the upper unit only needs to be
lifted up slightly for jammed paper to be removed. To close the upper unit, simply press
down firmly on both sides until it clicks into place.
▲
CLEARING PAPER JAMS
T R O U B L E S H O O T I N G