Canon DR-5080C EN - Manual (Page 4)

3
S C A N N I N G B A S I C S
S T E P
2 The scanner is equipped with four different feed modes to match
different types of document scanning jobs.
To set the feed mode, press the Feeding Option key on the scanner’s
operation panel until the desired mode is indicated. If none of the
indicator lights are on, this means that the scanner is in Remote mode.
■ Remote mode (default):
Use this mode when you wish to scan only one document stack.
■ Semi-Auto:
Use this mode when you wish to continuously scan separate, differently-sized
stacks of documents.
■ Auto:
Use this mode to scan multiple stacks of papers all of the same size.
■ Manual:
This mode is most suited for documents which cannot be smoothly fed into the
scanner; when using this mode, documents are fed into the scanner one page
at a time.
S T E P
3 Use the operation panel (or application software) to make the
following settings as needed. The Text/Picture modes enables you
to set the scanner mode to match your document type, and the
Simplex/Duplex key sets the unit to scan either one side or both
sides of the document. Brightness can be manually adjusted in 13
steps or set to adjust automatically (A).
▲▲
Feeding Option key
Simplex/Duplex Text/Picture
Brightness keys
1