Symbols – Ryobi TSS120L User Manual

Page 5

Advertising
background image

5 − English

SYMBOLS

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.

Safety Alert

Indicates a potential personal injury hazard.

Read Operator’s Manual

To reduce the risk of injury, user must read and understand
operator’s manual before using this product.

Eye Protection

Always wear eye protection with side shields marked to comply
with ANSI Z87.1.

No Hands Symbol

Failure to keep your hands away from the blade will result in
serious personal injury.

Wet Conditions Alert

Do not expose to rain or use in damp locations.

V

Volts

Voltage

A

Amperes

Current

Hz

Hertz

Frequency (cycles per second)

min

Minutes

Time

Alternating Current

Type of current

no

No Load Speed

Rotational speed, at no load

Class II Construction

Double-insulated construction

.../min

Per Minute

Revolutions, strokes, surface speed, orbits, etc., per minute

SYMBOL

NAME

DESIGNATION/EXPLANATION

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL

SIGNAL

MEANING

DANGER:

Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.

WARNING:

Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.

CAUTION:

Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.

NOTICE:

(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.

Advertising