WEATHER GUARD Model 96102-3-01 Screen Bulkhead, Full-Size, Ford, GM - Manual (Page 6)

6
WALL OR
WALL RIB
B-PILLAR
STEP 8: Realign the Driver Side Attachment
Brackets on top of the Blind Fasteners and
secure them to the wall or wall rib using two (2)
1/4-20 x 3/4” Self-drilling screws and 1/4” Lock
Washers.
Tighten all fasteners that were left loose
in Step 4.
INSTALLATION INSTRUCTIONS
TOP DOWN INSTALLATION
THROUGH FLOOR MAT
AND VAN FLOOR
BOTTOM UP INSTALLATION
THROUGH FLOOR MAT
AND VAN FLOOR
BLIND FASTENER INSTALLATION
THROUGH FLOOR MAT AND
VAN FLOOR (SEE PAGE 7)
NOTE: The floor bolting solution
could be a variation on any of these
three examples with or without the
floor mat.
Part No. 24-0306 REV. D ECN 5282 03/13