WEATHER GUARD Model 96901-3-01 Swing Door Conversion Kit User Manual
Installation manual, Bulkhead hinge kit, Plan your van (tips for faster installation)
1
A
INSTALLATION MANUAL
BULKHEAD HINGE KIT
ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS
BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
WWW.WEATHERGUARD.COM
VAN STORAGE SOLUTIONS
FOR THE WAY YOU WORK
TM
*24-0310*
Part No. 24-0310 REV. C ECN 5305 04/13
TOOLS REQUIRED
• Phillips Head Screwdriver
• 3/8" Ratchet Drive
• Sockets: 5/16", 11/32", 7/16"
• Open End Wrenchs: 11/32", 3/8"
INSTALLATION TIME
Approximate installation time: 15 minutes
per unit depending on van equipment
installation experience
.
PLAN YOUR VAN (TIPS FOR FASTER INSTALLATION)
PARTS LIST
A
1
Door Handle Assembly
B
2
Hinges
C
1
9" Weatherstripping
D
1
Bolt Kit
• Installing your WEATHER GUARD
®
Bulkhead is very clear cut following these instructions.
• Before cutting or drilling in the
, verify the location of you gas tank, fuel lines and electrical
cables so you don’t accidentally cut something important.
• Make sure that the blind fasteners go directly into the sheet-metal
and not through a
mat. Cut clearance holes for fasteners and spacers. Always wear eye protection when drilling
or cutting.
B