Xtreme 51870: Bluetooth Speaker - Manual (Page 4)

access calls. It’ll be diverted to speakerphone automatically.
(3) Ending a call:
During talking status, if you want to end this call, just short press the "MFB" button once to end
the call or end the call via your mobile phone in the normal way.
(4) Reject a Call:
Whenever you would like to reject
incoming telegram , press and hold the "MFB" button for 3
seconds until you hear a short beep. Or short press "MUTE" key Reject a Call
(5) Last Number Re-dialing:
Under standby mode, short press “MFB” button twice for the last number redialing with voice
report "Outgoing calls"
(6) Adjusting the Volume:
Hands-free calls in the state, short press "V+" and "V-" key to adjust the volume, until the required
volume adjustment, voice minimum and maximum values will be issued when the "Ding, Ding,
Ding" sound, that have been transferred to the maximum and minimum.
(7) Conversation switch between
mobile phone
and the mobile phone
A. From speakerphone to mobile phone:
When the conversation is in progress through the
mobile phone
, press the mode button activate,
then the conversation will be switched from the speakerphone to the mobile phone, press the Mode
button again, the conversation will be switched from the mobile phone to speakerphone.
Remark: this function is not available for all Bluetooth-enabled device; it depends on the
compatibility of the paired device.
8. Disconnection.
You may disconnect the Speakerphone from your mobile by powering off the Speakerphone or
select: BT Speakerphone" on your phone and disconnected.
Hands-free and voice prompt "mobile
phone has been disconnected"
In case of disconnection from the mobile phone when the Speakerphone is on, the speakerphone
will be shut down automatically after 10 minutes.
9. Voice Prompt selection.
The speech the product supports two languages, Chinese, English, playing default to Chinese,
if you want to switch English speech, press "MUTE" button for 3 seconds and will hear English
voice prompt, "has been selected English" when heard English when prompted, loosen the
hand, can be selected that language is English.
Also, need to switch back to the Chinese, long press "MUTE" button for 3 seconds and will
hear Chinese voice prompt, "has been selected Chinese" when you hear the Chinese when
prompted, loosen the hand, can be selected for Chinese language tips.
Note: the original version of the product only speech default language tips, speech upgraded
version can support multiple languages, methods of operation with the above operation.
10 .Restore to Default settings-Remove Previous Pairing & Connection
To reset the speakerphone with its default settings and clear the previous pairing information,
please take the following steps.
(1) Ensure that the speaker in the shutdown state.
(2) Long press "MFB" key and do not put, the first boot, then enter pairing, always according