Y-cam EyeBall Range - Manual (Page 26)

Page 26
Explanation of Operating Bar
1) Audio Upload: Press and release to start sending audio
from your computer’s microphone to the camera speakers.
Press and release to stop sending audio.
2) Mute. Click the Mute button to mute the audio.
3) Slide the slide block horizontally to adjust volume.
4) Snapshot. Press the Snapshot button to capture a still
image of the camera view.
5) Snapshot Config. Press this button to change the default
Snapshot path, the file is automatically assigned the data &
time of the snapshot.
6) Recording. Press the Record button to record from the
Live View to your local hard disk.
7) Recording Config. Click this button to set the recording
parameters, you can set record path, video file size and
select whether to start recording automatically when motion
is detected and the length of the recording in seconds.
8) Full screen mode. Click this button to view the camera
stream full screen. Press Escape key to exit.
9) Aspect. Resizes aspect ratio of Full Screen mode.
10) Live Feed Settings. Click this button to set Stream Type,
Video Codec settings and to enable or disable the Frames
Per Second (FPS) on screen display.