Y-cam EyeBall Range User Manual
Page 77
Page 77
6. Take note of the following:
a. IP Address
b. Subnet Mask
c. Default Gateway
d. DNS Servers (Both numbers with the first being the primary DNS server and the second being the secondary
DNS server)
7. Enter the details noted in step 6 into the relevant fields in the setup.
Note: The default IP address of the camera is 192.168.1.150. This can be changed to any IP address on your IP range. For
example if the IP address of your PC is 192.168.1.52 then the IP address of your camera should be unique and on the
same subnet, i.e. 192.168.1.X where X is any number between 1 and 255 except 52. Ensure the IP address you chose is
not the same as other devices on your network as this will result in conflict and may cause the device to not work
properly.
8. Once you’ve entered the details click “Apply” then “Exit”.