Cobra Electronics microTALK MT 800 - Manual (Page 6)

MODE FUNCTIONS
OPERATION
c. Press the LOCK button to return to
LISTENING MODE on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel on which, during scanning, you last
transmitted or received.
CTCSS Privacy Code Scan
Your microTALK ® radio can automatically scan
the CTCSS privacy codes (01 to 38) within one
(1) channel.
To Scan Privacy Codes:
1. While in LISTENING MODE,
press the CHANNEL UP or
CHANNEL DOWN button to
choose the channel on
which you wish to scan the
CTCSS privacy codes.
2. Press the MODE button until
the Scan icon and the small
numbers next to the
channel number flash on
the display.
3. Press the CHANNEL UP or
CHANNEL DOWN button to
begin scanning CTCSS
privacy codes within the
channel you selected.
English
If you do not press any button within 10 seconds,
your radio will automatically resume scanning
CTCSS privacy codes.
During Scanning (while not receiving
a transmission), You Can Choose From
The Following:
a. Press and hold the TALK button to
communicate on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or
channel/privacy code on which, during
scanning, you last received a transmission.
This will return the radio to LISTENING
MODE.
b. Press the MODE button to proceed to next
available Mode Function.
c. Press the LOCK button to return to
LISTENING MODE on either the channel or
channel/privacy code that was displayed
before you entered Mode Functions or the
channel/privacy code on which, during
scanning, you last received a transmission.
DCS Privacy Code Scan
You can automatically scan the DCS privacy codes
(01 to 83) within one channel.
The Scan icon will continue to be displayed when
CTCSS privacy code scan is On. Your radio will
continue to scan CTCSS privacy codes and stop as
an incoming transmission is detected. Your radio
will remain on that channel/privacy code for 10
seconds.
While setting CTCSS privacy code scan, if you do
not press any buttons for 15 seconds your radio
will automatically return to LISTENING MODE on
the channel/privacy code that was displayed
before you entered Mode Functions.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to
communicate on that channel/privacy code.
Your radio will remain on that
channel/privacy code and return
to LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN
button to resume scanning CTCSS privacy
codes.
If you press the TALK button while scanning
and not within 10 seconds of receiving
a transmission, you will transmit on the
channel/privacy code on which you last received
a transmission. This will return the radio to
LISTENING MODE.
To Scan DCS Privacy Codes:
1. While in the LISTENING
MODE, press the CHANNEL
UP or CHANNEL DOWN
button to choose the
channel on which you wish
to scan the DCS privacy
codes.
2. Press the MODE button until
the SCAN icon, DCS icon
and the small numbers next
to the channel number flash
on the display.
3. Press the CHANNEL UP or
CHANNEL DOWN button to
begin scanning DCS privacy
codes within the channel
you selected.
The scan icon will continue to
be displayed when DCS privacy
code scan is ON. Your radio
will continue to scan DCS privacy codes and stop
when an incoming transmission is detected. The
radio will remain on that channel/privacy code for
10 seconds.
While setting DCS privacy code scan, if you do not
press any buttons for 15 seconds your radio will
automatically return to LISTENING MODE on the
channel/privacy code that was displayed before
you entered more functions.
Select Scan Privacy
Codes
Mode Button
Select Channel
Channel Buttons
Select Scan Privacy
Codes
Mode Button
Select Channel
Channel Buttons