Cobra Electronics microTALK MT 800 - Manual (Page 9)

Not pressing any buttons for 15 seconds
will enter the Baby Monitor Mode setting
as Off and return the radio to LISTENING
MODE.
NOTE: Both radios must be tuned to the same
channel and privacy code to communicate.
To Terminate Baby Monitor Mode:
Choose one of the following:
a. Press the TALK button and return to
LISTENING MODE.
b. Press the LOCK button and return to
LISTENING MODE.
c. Press the MODE button and proceed to
the next available Mode Function.
10 Call Tone Settings
You can choose between 10 different call tone
settings to transmit a unique
call alert.
To Change a Call Tone
Setting:
1. Press the MODE button
until the letter “C” and the
current call tone number
(1 to 10) is displayed. The
current call tone will sound
for two (2) seconds.
2. Press the CHANNEL UP
or CHANNEL DOWN button
to hear the other call
tone settings.
"Roger Beep" Confirmation Tone
Your listener will hear an audible tone when
you release the TALK button. This alerts the other
party that you have finished talking and that it is
OK for them to speak. This feature can be turned
On or Off.
To Turn “Roger Beep” On or Off:
When you turn On your microTALK
® radio for the
first time, “Roger Beep” will be On.
1. Press and release the MODE
button until the “Roger
Beep” icon flashes on the
display. The current On or
Off setting is displayed.
2. Press the CHANNEL UP or
CHANNEL DOWN button to
select “Roger Beep”
On or Off.
3. When your desired Roger
Beep Mode setting is
displayed, choose one
of the following:
a. Press the MODE button
to enter the new setting and proceed
to other functions.
b. Press the LOCK button to enter the new
setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to
enter the new setting and return to
LISTENING MODE.
3. When your desired call tone setting is
displayed, choose one of the following:
a. Press the MODE button to enter the new
setting and proceed to other functions.
b. Press the LOCK button to enter the new
setting and return to LISTENING MODE.
c. Do not press any buttons for 15 seconds to
enter the new setting and return to
LISTENING MODE.
The setting you select will be saved when you
turn your radio off and on again. When the
“Roger Beep” is On, the “Roger Beep” icon
will be displayed.
MODE FUNCTIONS
OPERATION
English
Call Tone Setting
Mode Button
Channel Buttons
Channel Buttons
Select Roger Beep
Mode Button