Rear view – Canon DR-5080C User Manual
Page 19
Advertising
16
Chapter 1
About DR-5020/5080C
◆
Rear view
Air vent
Power cord connector
Connect the power cord provided with
the scanner to this connector.
SCSI connectors
Connect the SCSI connectors to these connectors.
Connector shape: D-sub half-pitch 50-pin (pin type)
DIP switch
This switch is for setting the SCSI ID
and turning the terminator ON or OFF.
(P.25)
To avoid overheating and causing a fire, never block the air vents on the rear of the
scanner.
CAUTION
Advertising