Canon DR-5080C - Manual (Page 36)

33
ENGLISH
Turning the Power ON/OFF
Follow the procedures below to turn the scanner power ON and OFF.
Turning the Power ON
Be sure to turn the power of all connected SCSI devices ON before the computer ON.
1
To turn the scanner ON, press the power switch.
“0000” is displayed on the counter display of the operation panel.
Settings on the operation panel other than the counter display are reverted to the
settings before the scanner power was turned OFF.
If you hear a strange sound, detect smoke or abnormal heat, sense vibration, or
smell odd odors around the unit, turn the power switch OFF immediately and
disconnect the power cord from the outlet. Call for service immediately. Failure to
do so might cause a fire.
WARNING
2.4 Turning the Power ON/OFF
MEMO
HINT