Cisco 1710 - Manual (Page 6)

6
7
Connect the Power Supply
Follow these steps to connect the router to the power supply:
Step 1 Connect the attached power-supply cord to the power socket (labeled +5, +12, -12 VDC) on the back panel of the
router.
Step 2 Connect the separate power cord to the power socket on the power supply.
Step 3 Connect the other end of the separate power cord to a power outlet.
Figure 3 Connecting the Power Supply
Step 4 Turn on the router by pressing the power switch to the on ( | ) position.
Step 5 Confirm that the router has power by checking that the PWR LED on the front panel is on.
Cisco 1
710
CONSO
LE
AUX
FDX
LNK 100
LINK FDX
MOD OK
Power socket
56531
Power supply
Separate
power cord
Attached
power supply cord
10/100 ETHERNET
10BT ETHERNET
+5, +12, -12
VDC