Canon PIXMA MP250 - Manual (Page 315)

5.
To specify MP Navigator EX 3.0
If you are using Windows Vista:
The program selection screen may be displayed after pressing the SCAN button. In this case, select
MP Navigator EX Ver3.0 and click OK.
You can set MP Navigator EX to launch whenever pressing the SCAN button. For details, see For
Windows Users .
If you are using Windows XP:
The program selection screen may be displayed after pressing the SCAN button for the first time. In
this case, specify MP Navigator EX Ver3.0 as the application software to use, select Always use this
program for this action, then click OK. From the next time, MP Navigator EX is automatically started.
Important
If the position or size of an image is not scanned correctly depending on the type of the original,
refer to Scanning Photos and Documents and change Document Type and Document Size
settings of MP Navigator EX to match the original being scanned.
If You Want to Edit or Print the Scanned Images
MP Navigator EX enables you to edit the scanned images, such as optimizing or trimming.
You can also start application software from MP Navigator EX to edit or print the scanned images.
Let's Try Scanning
If You Want to Scan Originals with Advanced Settings
ScanGear enables you to scan originals with advanced settings such as the resolution.
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
Note
You can use a TWAIN- or WIA- (Windows Vista and Windows XP only) compliant application
software and the Control Panel (Windows Vista and Windows XP only) to scan originals with
this machine.
For details, refer to
Other Scanning Methods .
Page top
Page 315 of 678 pages Saving Scanned Data to PC Using the Operation Panel of the Machine