Concord Camera 5040 - Manual (Page 26)

25
MAKING CONNECTIONS
VIEWING FILES ON THE TV
The camera allows you to view individual files on the television. To begin, check your television
documentation to determine what video standard you should set your camera to.
NTSC Japan, U.S.A., Canada, etc.
PAL Europe, Asia (excluding Japan), Oceania, etc.
Setting Video Output Signal Mode
1. Press MENU button.
2. Press to select Setup Menu.
3. Press the
or to highlight TV Output, then press the SET or to enter its submenu.
4. Press the or to select NTSC or PAL.
5. Press SET button to confirm
Connecting the camera with your TV set
1. Turn off the camera.
2. Plug one end of the supplied TV Out Cable to the video-in
jack on the TV.
3. Plug the other end of the TV Out Cable to the TV OUT
terminal on the camera.
4. Turn on the TV and switch it to VIDEO mode.
5. Turn on the camera.
Everything that would normally appear on the camera’s
LCD will appear on the TV. The camera’s LCD turns off
automatically during video output.
6. When the camera is connected with the TV, you can refer
the instruction above to use the TV screen as the camera’s
LCD to do things such as, to taking pictures, to taking video
clips and to view the files.
DOWNLOADING FILES ONTO YOUR COMPUTER
Download files taken with the camera to a computer in one of the following ways:
1. Using an SD card reader.
2. Connect the camera to a computer with the USB cable.
Downloading files by using card reader
1. Remove the SD card from the camera, and insert it into an
SD card reader.
2. Connect the SD card reader to the computer.
3. Double-click the icon of the drive with the SD card.
4. Copy images from the card into a folder of your computer.
MAKING CONNECTIONS