Beckett RWF40 Hints Manual - Manual (Page 14)

13/16 CC1B-Hints-en Preliminary 04.02.2003 HVAC Products
3. Notes
3.2 Your record of values
RWF40 Setpoint Your
Man. Ref. Display Setting Configuration level items
( Sec 6.4 )
Range Factory
Sec 8.1 C111 Analog input 1, 2 and 3;D2 setpoint changeover / shift N /A 9030
Sec 8.1 / 8.2 C112 Limit comparator; controller type; setpoint 1; locking N /A 0010
Sec 8.1 C113 Unit address; decimal place / unit, signal for out-of-range N /A 0110
Sec 8.3.1 SCL SC ale L ow, analog input 1, measured value range -1999 to +9999 0
Sec 8.3.2 SCH SC ale H igh, analog input 1, measured value range -1999 to +9999 100
Sec 8.3.3 SCL2 SC ale L ow, analog input 2 , measured value range -1999 to +9999 0
Sec 8.3.4 SCH2 SC ale H igh, analog input 2 , measured value range -1999 to +9999 100
Sec 8.3.5 SPL S et P oint L ow limit -1999 to +9999 0
Sec 8.3.6 SPH S et P oint H igh limit -1999 to +9999 100
Sec 8.3.7 OFF1 OFF set analog input 1 , Actual value correction -1999 to +9999 0
Sec 8.3.8 OFF2 OFF set analog input 2 , Actual value correction -1999 to +9999 0
Sec 8.3.9 OFF3 OFF set analog input 3 , Actual value correction -1999 to +9999 0
Sec 8.3.10 dF1 d igital F ilter, analog input 1, 2 nd order, in seconds 0 to 100 1
Setpoint Your
Display Setting Configuration level items
, Modbus option (only RWF40.0X2B97) ( Sec 6.4 )
Range Factory
Sec 8.3.11
dF3 Filter time constant, d igital F ilter, analog input 3 weather-dependent setpoint shift 0 to 1440 1278
Sec 8.3.12
oLLo W o rking range, L imit Lo wer
-1999 to +9999
-1999
Sec 8.3.13
oLHi W o rking range, L imit Hi gh
-1999 to +9999
9999
Sec 8.3.14
Dtt Bus wa t ch D og t imer (in seconds) 0 to 7200 30
Setpoint Your
Display Setting Parameter level items
( Sec 6.3 )
Range Factory
Sec 7 / 8.2 AL A larm value for K6 L imit comparator (alarm programmable relay) -1999 to +9999 0
Sec 7 / 8.2
HYSt Hyst eresis, (switching differential) for K6 limit comparator 0 to 999.9 1
Sec 7 / 8.2
Pb.1 P roportional b and 1 (affects P-response of controller) 0.1 to 999.9 10
Sec 7 / 8.2
dt d erivative t ime (in seconds) (affects D-response of controller) 0 to 9999 80
Sec 7 / 8.2
rt Integ r al action t ime (in seconds) , (affects I-response of controller) 0 to 9999 350
Sec 7 / 8.2
db * d ead b and, contact spacing, * visible when C112 is xxx0, 3-pos modulating 0 to 999.9 1
Sec 7 / 8.2
tt * Ac t uator running t ime (in seconds) , * visible when C112 is xxx0, 3-pos modulating 10 to 3000 15
Sec 7 / 5.51 HYS1 Switch-on threshold, HYS teresis 1 , 2-stage burner 0 to -199.9 -5
Sec 7 / 5.2 HYS2 Switch-off threshold, HYS teresis 2 , 2-stage burner 0 to HYS3 3
Sec 7 / 5.2 HYS3 Switch-off threshold, HYS teresis 3 , upper 0 to 999.9 5
Sec 7 / 5.6 q Response threshold ( Q ) 0 to 999.9 0
Sec 7 / 5.51 H H eating curve slope 0 to 4 1
Sec 7 / 5.5 P P arallel displacement (weather dependent setpoint shift) -90 to +90 0
Setpoint Your
Display Setting User level items
( Sec 6.2.1 )
Range Factory
Sec 6.2.1 SP1 S et P oint 1 SPL to SPH 0
Sec 6.2.1 SP2 S et P oint 2 , digital input 2, D2=0 SPL to SPH 0
Sec 6.2.1 dSP d igital S et P oint shift, digital input 2, D2=1 SPL to SPH 0
Sec 11.1.3 tA t emperature, A mbient (outside) analog input 3, visible when C111 is xx1x, xx2x, xx3x --
Sec 11.1.2 SP.E S et P oint E xternal, predefinition, analog input 2, visible when C111 is xx1x, xx2x, xx3x SPL to SPH --