BendixKing AV8OR 3D - Manual (Page 13)

AV8OR 3D User Guide 1
DRAFT – FOR REVIEW ONLY
User Guide:
Chapter 1 Introduction to Software Installation
Version 4.4 Size: 7 x 9 Mode: Printing 5/23/06
1
Quick Start Guide
Overview
This quick-start section will get you up and running with the basic features of
AV8OR 3D. Subsequent chapters will guide you through using AV8OR 3D from
flight planning all the way to touchdown.
After you become familiar with
AV8OR 3D, you can refer to subsequent sections to
obtain information about customizing the configuration of your AV8OR 3D.
Now, let’s get started...
Your Tablet PC
While the Tablet PC is a multifunction device that you can use as a home
computer, it has been specifically configured by Honeywell to
run the AV8OR 3D. This includes display and other settings within the PC. Altering
these settings may affect AV8OR 3D functionality.
Installing AV8OR 3D in Your Aircraft
Refer to Section 2, “Installing AV8OR 3D in Your Aircraft” for details on the
following procedures:
• “Installing the INU and Antenna” on page 13.
• “Attaching the Mount” on page 14
• “Connecting the Power Supply and Cables” on page 15