BendixKing AV8OR 3D - Manual (Page 42)

DRAFT
In Flight
AV8OR 3D User Guide 31
Airspace
Airspace boundaries are shown as thick lines. Terminal airspaces boundaries are
shown in blue, MOA in magenta, and special use airspaces in orange.
When the aircraft is either close to the airspace, or inside the airspace, the interior
of the airspace is shaded. Proximity of the aircraft to the airspace is considered
“close” based on the same parameter that is set for terrain awareness.
An airspace is considered “close” to the aircraft when:
• The airspace is in front of the aircraft and less than 10 nautical miles away,
and is at the same altitude or within the range + or - the terrain awareness
setting.
or
• The airspace is above or below the aircraft within the terrain awareness
setting.
The following kinds of airspaces are displayed:
Bravo airspace
Charlie airspace
Delta airspace
Military operation area (MOA)