BendixKing KMD 540 - Addendum System KMD 850 - Manual (Page 84)

Revision 6 Feb/2009 KMD 550/850 FIS Addendum
71
1. The cursor will be over
the first character of the way-
point identifier. Select the
desired character by turning
the inner knob. The screen
will change to that shown in
Figure 88.
2. Turn the outer knob one
click clockwise to move the
cursor to the next character
field as shown in Figure 89.
Turn the inner knob to select
the desired character.
3. Turn the outer knob one
click clockwise to move the
cursor to the next character
field. Turn the inner knob to
select the desired character.
See Figure 90.
4. Turn the outer knob one
click clockwise to move the
cursor to the next character
field. Turn the inner knob to
select the desired character.
Figure 90
Figure 89
Figure 88
Normal Operation