BendixKing FPI 3501B System FPD 500 - Manual (Page 13)

FPD 500 FLAT PANEL DISPLAY SYSTEM
3.1.5 RATE OF TURN
A white stationary rate of turn scale pro-
vides the reference for the rate of turn
pointer. A standard rate turn (3
degrees/second) is indicated by the pointer
aligning directly under the left or right
index.
3.1.6 SPEED COMMAND
A stationary white vertical scale located on the
left side of the EADI is the reference for the
fast-slow pointer (orange circle). The speed
command circle indicates deviation from the
selected speed. Full scale deflection indicates
10 knots above or below the target airspeed.
3.1.7 GLIDESLOPE INDICATOR
A white stationary dotted vertical scale located
on the right side of the indicator is the refer-
ence for the glideslope deviation pointer (white
triangle). The glideslope pointer indicates the
center of the glideslope with respect to the
actual aircraft position.
3.1.8 RISING RUNWAY
A green runway symbol representing the
airport runway moves laterally in relation to
a white expanded localizer deviation scale.
The lateral deviation indicates the aircraft
position with respect to the localizer center-
line. The runway symbol rises linearly to
indicate radio altitude below 200 feet. The
runway begins to rise at 200 feet and
touches the bottom of the aircraft symbol at
zero feet of radio altitude.
EADI/EHSI Displays
3-3
Rev. 0
Jan/97
A
DIM F
S
F
Figure 3.1-8
Speed Command
Indicator
N
M
R
H
GS
Figure 3.1-9
Glideslope Indicator
Figure 3.1-7
Rate of Turn Indicator
5 5
10 10
20 20
Figure 3.1-10
Rising Runway