BendixKing KFD 840 - Manual (Page 31)

Honeywell Bendix/King KFD 840 Primary Flight Display
KFD 840 PG PN 7450-0840-01 Getting Started
Rev C May 28, 2010 2-13
© Honeywell International Inc. Do not copy without express permission of Honeywell
Aircraft Configuration (CONF)
The CONF page is used to set the following aircraft configuration
parameters of the KFD 840:
PARAMETER SETTING
Baro Correction Units IN HG or HPA
Metric Altitude DISABLED/ENABLED
Minimum Altitude Alert (MIN) DISABLED/ENABLED
Outside Air Temperature (OAT) Units Degrees F or Degrees C
NOTE: The CONF and INFO menu selections are disabled when
airspeed is above 40 kts (46 mph). The KFD 840 will
automatically revert to PFD display above this speed.
To access the CONF page press the left knob until the CONF is
highlighted in the menu. The KFD Flight Settings page will be
displayed.
Figure 2-9: KFD Flight Settings Page Part 1