Heading readout, Select heading readout and bug, Heading readout -3 – BendixKing KFD 840 User Manual
Page 65: Select heading readout and bug -3, Figure 7-3: selected heading readout and bug
Honeywell Bendix/King KFD 840 Primary Flight Display
KFD 840 PG PN 7450-0840-01 HSI Area
Rev D July 12, 2010 7-3
©
Honeywell International Inc. Do not copy without express permission of Honeywell
Heading Readout
The heading readout is a digital representation of the compass
heading. The heading readout is displayed as three digits, using
leading zeros when needed and is limited from 001 to 360 degrees.
Select Heading Readout AND Bug
Figure 7-3: Selected Heading Readout and Bug
A heading select bug (notched
magenta
rectangle) moves around
the compass when the HDG knob is rotated. The selected heading
readout is displayed below the selected heading annunciator in a
three-digit format, in the upper left portion of the HSI. The readout
range is 001 to 360.
Selecting HDG with the HDG knob will allow the selected heading to
be set. Pushing and holding the HDG knob will (SYNC) synchronize
the selected heading to the current aircraft heading.