BendixKing KMD 540 - Addendum System KMD 850 - Manual (Page 10)

2
Rev 2 Jan/2002 KMD 850 Wx Radar Addendum
NORMAL OPERATION
To display the WX Radar page press the WX button. Note that in some
installations this button may have to be pushed multiple times to switch
between radar and stormscope.
The following illustration defines the data that appears on the WX Radar
Page when the radar is active and the horizontal view is displayed:
1 Aircraft Symbol
2 Knob Function Label - Rotating the outer knob selects between
Standby (SBY), Test (TST), ON and SET modes.
3 Display Range Indications
4 Tilt Angle - XX.X Degrees up (U) or down (D).
5 Joystick Function Label - Moving the joystick up and down adjusts
the radar tilt. Moving the joystick left and right adjusts the location of
the yellow track line.
6 Stabilization Indication
7 Track Angle
8
WX Radar Mode Indication - TEST, WX, WX/ARL (Auto Range Limiting
or MAP (Ground Mapping Mode)
9 Available Functions - Displays icons representing data available
(black) and displayed (color)
10 Fault Message Window - See Error and Fault Messages
10 2
5 6
9
7
1
4
3
8
KMD 850 Wx PG R3 7/2/04 8:54 AM Page 2