CANOGA PERKINS 2346 T3 Fiber Optic Modem - Manual (Page 15)

EdgeAccess Universal Chassis System
2346 T3 Modem 3-3
Use these keys to navigate the screens:
• Space bar When a menu item is highlighted, press <Space> to cycle through all options for that
item.
• Tab Press <Tab> to move the highlight to the next column to the right.
• Enter Press <Enter> to select the highlighted option for a menu item.
• Escape Press <Esc> once to cancel changes for the selected item or to return to the previous
screen; press <Esc> two or more times to return to the Main Menu from two or more menu levels
deep.
User Interface Organization
The user interface consists of selectable, nested screens, available in this order:
Main Menu
1. System Configuration
1. Hardware Configuration
2. Functional Configuration
3. Trap Configuration
4. Alarm Output Configuration
5. SNMP Configuration Parameters
8. Host Table
2. Link Error Counters
3. System Alarms
4. Utilities
8. PING Generation
5. Software Upgrade
Login and Main Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, press
<Enter> at the prompt for the password. Otherwise, type your password and press <Enter>.
After you log in, the Main Menu for the DMM appears. This is the main management screen for the
DMM. For details on all menu options, see the manual for your DMM. From this screen, you can
access the 2346 by either of two methods.