4 manage snmp and host access – CANOGA PERKINS 9161 Network Interface Device User Manual
Page 30
9161 Network Interface Device User’s Manual
Using the Software
Managing the 9161
18
To set up synchronization with SNTP, follow these steps:
1. At the System menu, type
10
, SNTP Configuration and press <Enter>.
2. At the SNTP Client Configuration screen, type the number for a parameter and press
<Enter>, then follow the prompts on the screen.
•
SNTP Enable: Enable (yes) or disable (no) synchronized time
•
SNTP Server IP Address: Enter the address for the server; 0.0.0.0 indicates no
server
•
Time Resync Interval in hours: Set how often, in hours, that the 9161 tries to syn-
chronize its time to the Sntp server; Range is 0 (attempt to synchronize at bootup,
only) to 24 (once daily)
•
Offset from GMT in hours: Set the difference, in hours, between this 9161 and
Greenwich Mean Time (GMT), which is similar to Coordinated Universal Time
(UTC); Range is -12 to 12
•
Summertime: Enable (yes) or disable (no) Daylight Saving Time
3. To return to the System menu, press <Esc>.
To directly set the date and time, follow these steps:
1. From the Main Menu, type 6, Utilities, and press <Enter>.
2. At the Utilities menu, type
1
, Set Date and Time and press <Enter>.
3. At the prompt to enter the current date and time, type the current information in DD/MM/
YYYY HH:MM format.
4. To return to the Main Menu, press <Esc>.
3.3.4 Manage SNMP and Host Access
To set values for basic system parameters, including some parameters used by SNMP, go to the
IP Settings screen and follow these steps:
1. From the System menu type
3
, IP Settings, and press <Enter>.
2. At the IP Settings screen, type the number for an item and press <Enter>, then enter data
or press <Space> to cycle through the options and press <Enter> to select an option.
•
Local IP Address: Set the IP address for this 9161
•
Subnet Mask: Mask that sets the network ID part of the IP address
•
Gateway IP Address: Address of the network node that connects to another net-
work
•
Enable BOOTP Mode: Enable or disable BOOTP requests
•
Management VLAN Id: Set the number for the VLAN