Daiwa SEABORG-500Fe - Manual (Page 23)

21
Live Line Alarm sensitivity adjustment
Strike Zone Memory
Live out Alarm
OFF
MAX
5. Press the MODE BUTTON to move to the next display mode.
6. Turn it ON using the power lever.
7.
Press the MODE BUTTON to move to the next display mode.
9.
Press the MODE BUTTON to move to the next display mode.
8.
Turn it ON using the power lever.
Functional setting operation
(5. Live lining mode)
Increase sensitivity
Increase
sensitivity
Decrease sensitivity
Decrease
sensitivity
(The alarm will sound more easily.) (The alarm will sound less easily.)
Default setting
(setting)
Can be properly adjusted to accommodate current/tidal speed as well as wave and swell size.
- The available setting range is 1 to 10.
-When INVERSE COUNTER BUTTON is pressed, the depth of
stored strike zone will be calculated to one decimal place and
then will be shown in the display.
-When the boat is at a place shallower than the shelf stored in the
memory, memory update will not be carried out until Auto Stop
of winding.
Display
in blinking
Live line alarm
sensitivity
adjustment
Live out
(An example of strike zone memory)
(A case of alarm sounding at 95.0 m and
winding for 5.0 m)
-Shows how much line was out when a hookup occurred and lets
you drop a fresh bait back into the strike zone.
-Signals movement of a bait swimming or drifting in current with a
beep for every meter moved.
-An alarm sounds when the speed of the swimming or drifting bait
accelerates, indicating a pickup.