Daiwa SEABORG-500Fe - Manual (Page 35)

33
Trouble shooting
8,18
7
3
3
5
2
8
3
14
14,15
23-25
14
14
17
Symptom Possible causes To do
Ref.
page
Motor does not
respond to the
power lever
Counter display
does not appear.
Inverse counter
does not appear
The reel jigs on
its own.
Auto stop
function does
not work
There are
counter errors.
Did not pull the lever to OFF
position.
Unstable power source
Incorrect battery connection
Did not press
INVERSE COUNTER BUTTON
Low power voltage
Did not press RESET BUTTON
at surface
Error for sinker weight or
rocking of the boat
Line is elongated.
There was a large tension
change because of catch/loss
of a fish.
Line length has increased
due to stretching.
The counter displays 0.0 m.
Battery charge is low.
Cord worn or corroded
It is a normal function to avoid over
winding. Press RESET BUTTON to
continue winding.
Pull the lever to OFF and then move
forward again to start winding.
Use another power source, such as
electric reel specific batteries.
3
Unstable power source
Use another power source, such as
electric reel specific batteries.
Recharge the battery.
Replace the cord.
It is normal. Press
INVERSE COUNTER BUTTON .
Replace with a recharged battery.
Press RESET BUTTON to reset depth
to zero with rig at the surface.
Reset the depth counter at the surface.
Reset the counter.
Revise the display.
Connect correctly.
Contact your dealer if the reel does not function properly despite the above details being confirmed, in
the event of other problems arising, and to order parts.
The power lever is set to the
OFF position.
Set a jigging speed using the power lever.
Jigging will not start
even when JIGGING
BUTTON is pressed.