Daiwa SEABORG-500Fe - Manual (Page 29)

27
Functional setting operation
(9. Chumming timer winding)
Chumming timer winding
The right timing for the best results. After a pre-determined amount of time has passed, the reel
starts winding automatically.
- After pre-set 5 minutes have passed, the reel automatically
winds up.
- When the timer is set, the timer indicator is shown in the
display. To stop using the timer, set its time to zero.
- Pre-set time can be confirmed by pressing the INVERSE
COUNTER BUTTON .
- The chumming timer will not function if the indication of the depth
counter goes out of range (+20m and -20m).
It will not function any more if once the indication of the depth
counter goes out of this range.
2
1. Press MODE BUTTON until you come to the timer setting
display.
is on the screen. The default setting is zero minutes or
.
(In the case when the timer winding is
set to 5 minutes)
Use
The chumming timer helps ensure you check
baits at even intervals, a real help when
dropping multiple lines.
2.
Use the power lever to set the number of minutes.
(Shown is the timer set to 3 minutes.)
(timer setting display)
1