Setting the unit for distance measurements, Setting the unit for tilt measurements, Measuring with the tripod ( ) – Leica Geosystems Leica DISTO D3a - User Manual User Manual
Page 11: Beep ( ), Level in status field ( ), Display illumination ( )
10
Menu functions
Leica DISTO™ D3a 776175a gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Setting the unit for distance
measurements
The following units can be set:
Setting the unit for tilt
measurements
The following units can be set for tilt measurements:
Measuring with the tripod (
)
The reference must be appropriately adjusted in
order to be able to take correct measurements with
a tripod. To do this select
ON
in this menu item.
You can switch the reference on the tripod on or off.
The setting can be seen on the display
.
Beep (
)
You can switch the beep on or off.
Level in status field (
)
The level (in °) in status field can be switched on or
off.
Display illumination (
)
The display illumination can be turned on or off.
Distance
Area
Volume
1.
0.000 m
0.000 m²
0.000 m³
2.
0.000
0
m
0.000 m²
0.000 m³
3.
0.00 m
0.000 m²
0.000 m³
4.
0.00 ft
0.00 ft²
0.00 ft³
5.
0'00''
1
/
32
0.00 ft²
0.00 ft³
6.
0.0 in
0.00 ft²
0.00 ft³
7.
0
1
/
32
in
0.00 ft²
0.00 ft³
Units for tilt
1.
+/- 0.0°
2.
0.00%