Leica Geosystems Leica DISTO D3a - User Manual - Manual (Page 7)

6 Start-up Leica DISTO™ D3a 776175a gb
D
GB
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Start-up
Inserting/replacing batteries
1 Remove battery compartment lid and attach
handstrap.
2 Insert batteries, observing correct polarity.
3 Close the battery compartment again. Replace
the batteries when the symbol
flashes perma-
nently in the display.
)
Only use alkaline or rechargeable batteries.
)
Remove the batteries before any long period
of non-use to avoid the danger of corrosion.
Changing the reference point
(multifunctional endpiece)
The instrument can be adapted for the following
measuring situations:
• For measurements from an edge, fold out the
positioning bracket until it first locks in place.
• For measurements from a corner, open the posi-
tioning bracket until it locks in place, then push
the positioning bracket lightly to the right to fold
it out fully.
A built-in sensor automatically detects the orienta-
tion of the positioning bracket and adjusts the zero
point of the instrument accordingly.