Leica Geosystems Leica DISTO D810 touch - Manual - Manual (Page 20)

Leica DISTO TM D810 touch 799093a 19
EN Functions
Calculator
1 2
C/CE
=
3
Select key on
display.
Confirm every
key.
Use selection keys for
clear or result.
i
The measurement result from the
main line is taken over to the calcula-
tor and can be used for further calcu-
lations.
Ft/in fractions are converted into
ft/in decimal.
To takte over a result from the calcu-
lator in the basic mode press DIST
before leaving the calculator function.
Adjusting measuring reference/tripod
1 2 3
Distance is measured from the rear of the
device (standard setting).
Distance is measured from the front of the
device (lock symbol = permanently).
Distance is measured from the tripod
thread permanently.
Distance is measured from a Leica DISTO
Adapter FTA 360 (lock symbol = perma-
nently)
4
Confirm setting.
i
If device is
switched off,
reference
goes back to
standard set-
ting (rear of
the device).