Leica Geosystems Leica Racer 100 - Manual (Page 12)

7 Menu functions Leica Racer 100 784117 en
EN
D
F
I
E
P
NL
DK
S
N
FIN
J
CN
ROK
PL
H
RUS
CZ
Setting the unit for distance
measurements
The following units can be set:
Setting the unit for tilt
measurements
The following units can be set for tilt measurements:
Beep ( )
You can switch the beep on or off.
Continuous laser ( )
You can switch the continuous laser function on or
off.
With the continuous laser function set on, each press
of the
button triggers a measurement. The laser
automatically switches off after 15 minutes.
Measuring with the tripod ( )
The reference must be appropriately adjusted in
order to be able to take correct measurements with
a tripod. To do this select the TRIPOD symbol in this
menu item. You can switch the reference on the
tripod on or off. The setting can be seen on the
display .
Display - keypad illumination ( )
Automatic illumination of the display and the keypad
can be switched on or off.
Reset - returning the instrument to
the factory settings (
)
The instrument has a RESET function. When you
select the menu function RESET and confirm, the
instrument defaults to the factory settings.
Distance Area Volume
1. 0.000 m 0.000 m² 0.000 m³
2. 0.000 0 m 0.000 m² 0.000 m³
3. 0.00 m 0.000 m² 0.000 m³
4. 0.00 ft 0.00 ft² 0.00 ft³
5. 0'00'' 1 /
32
0.00 ft² 0.00 ft³
6. 0.0 in 0.00 ft² 0.00 ft³
7. 0
1
/
32
in 0.00 ft² 0.00 ft³
Units for tilt
1. +/- 0.0°
2. 0.00%
BEEP
TRIPOD