Leica Geosystems Leica DISTO A6 - DISTO transfer manuals Pocket PC - Manual (Page 2)

Description of the Program-Window of DISTO™ transfer ppc
Here is the result of the last
measurement
[Enter]
If this box is marked, each
measurement is automatically
completed with [Enter], as if this
key has been pressed. Excel
jumps e.g. to the next lower cell.
[Unit]
If this box is marked, the actually current measuring unit of
the DISTO™ is sent with each measurement.
[Tab]
If this box is marked, each
measurement is automatically
completed with [Tab], as if this key
has been pressed. Excel jumps
e.g. to the next cell on the right.
General Information
How to send Measurements
If a measurement has to be sent from the Leica DISTO™ to the PocketPC, there are different
procedures depending on the different DISTO™ types.
o When using the Leica DISTO™ plus press the [Enter] key.
o When using the Leica DISTO™ A6 press the [Bluetooth] key.
[Enter] and [Tab] Settings
o Is [Enter] and [Tab] marked at the same time, then after the measured value first [Enter] and
then [Tab] is being transferred.
o Is neither [Enter] nor [Tab] marked, a blank is sent instead. That is e.g. very useful for the
transfer into CAD programs. The blank is treated as confirmation.
Using the Leica DISTO™ Cursor Keys
If the [2nd] key of the Leica DISTO™ keyboard is pressed, the second keyboard layer of the Leica
DISTO™ keyboard is activated. Now the cursor keys are active, and the Pocket PC cursor can be
directed via the Leica DISTO™. This is very convenient in connection with Excel or similar programs!
Installation and user manual for DISTO transfer ppc Page 2 of 2