Setting up the tripod, 16 simple measurements – Leica Geosystems T100 User Manual
Page 16
16
Simple measurements
T105/T110-1.3.0en
8
12
T100Z32
When setting up the tripod
pay attention to a horizontal
position of the tripod plate.
Heavy inclinations of the tripod must
be corrected with the footscrews of
the tribrach.
T100Z33
Setting up the tripod
1. Loosen screws of tripod legs, pull
out to required length and tighten
screws.
2. In order to guarantee a firm
foothold sufficiently press the
tripod legs into the ground.
When pressing the legs into the
ground note that the force must be
applied along the legs.
Careful handling of tripod
• Check all screws and bolts for
correct fit.
• During transport always use the
cover supplied.
Scratches and other damages can
result in poor fit and measuring
inaccuracies.
• Use the tripod only for surveying
jobs.
T100Z57
T100Z19
1.
1.
1.
2.
2.
2.
T100Z58