Setting v-angle – Leica Geosystems T100 User Manual
Page 32
Advertising
32
Configuration
T105/T110-1.3.0en
8
12
15
3. Confirm selection with
.
The setting is valid for all
angle units and can only be
changed via the configuration
menu.
T100Z29
T100Z28
Setting V-angle
The "0"- orientation of the vertical
circle can be either selected for the
zenith or the horizontal plane.
1. Scroll to symbol
/
2. Select desired option with
V-angle "0" for the zenith
:
The V-anlge increases from 0° - 360°
(0 - 400 gon).
V-angle "0" for the horizontal
plane
:
V-angles above the horizontal plane
are indicated as positive values and
below the horizontal plane as negati-
ve values. Up to the maximum value
of 180° (200 gon) the V-angle
decreases/increases.
Advertising