Leica Geosystems T100 - Manual (Page 55)

55
T105/T110-1.3.0en Care and storage
8
12
15
31
41
Reticle
Checking by turning the graticule
1. Aim on any point A in the centre of
the graticule.
2. With the vertical drive move the
instrument upwards to the edge of
the range of vision (point A1).
3. If point A moves along the vertical
line no more adjustment is
necessary.
Adjusting
1. If point A does not move along the
vertical line remove cover of
adjusting screws on the eyepiece.
2. With the help of the supplied tool
loosen all four adjusting screws
symmetrically. Then turn the
graticule around the centre until
the vertical line covers point A1.
3. Subsequently, tighten adjusting
screws symmetrically and repeat
checking until adustment is
correct.
T100Z50 T100Z51 T100Z52
A1